Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair in Richmond
A garage door that won’t open or close changes your whole day. You can’t get the car out, the house sits open to the alley or the street, and every attempt to force it risks making the damage worse. We fix that. Garage Door Repair Richmond Pros is a dedicated garage door company, not a handyman service, and our technicians have up to 13 years of experience working on the brands Richmond homes actually have. We answer 24/7, we dispatch fast from 7am to 7pm Sunday through Friday, and same-day repair is often possible. One call covers springs, cables, panels, tracks, rollers, openers and sensors, so you aren’t calling three contractors. Call (855) 774-2730 and we’ll get your door moving again.
What Our Garage Door Repair Service Includes
Garage doors fail in a handful of predictable ways. Knowing which part failed, and why, is the difference between a lasting repair and a repeat visit. Here’s what our garage door repair work covers in Richmond.
Panel Replacement
Panels are the face of your door, and they take the hit from backed-in cars, wayward balls and general wear. A bent or cracked panel leaves a gap in the weather seal, lets rain and pests in, and can throw the door off balance so the opener strains against it. We replace individual panels on Clopay, Amarr and Wayne Dalton doors, matching profile and color where the manufacturer still makes it, and we check alignment and balance before we close up the job.

Spring Repair
A torsion or extension spring is the part that counterbalances the door’s weight, and when it snaps your door becomes almost impossible to lift safely. Spring work is the most dangerous repair on any garage, which is why we’d rather you didn’t try it yourself; call us instead. We replace torsion and extension springs, including matched pairs where the second spring is close to failing, and we set tension and test the balance so the opener isn’t carrying a load it wasn’t built for. A single spring typically runs $180 – $340; a matched pair is usually about twice that because both are replaced together.

Cable Repair
The steel cables run from the bottom corners to the spring system, and if one frays or snaps the door can drop or twist in its track. Cables usually fail alongside springs, since a snapped spring suddenly overloads them. We replace the pair, inspect the drums and bottom brackets, and confirm the new cables spool cleanly before we test the door. Cable repair usually runs $130 – $250.

Track Realignment
Tracks guide the door’s path, and when they’re bent from an impact or knocked out of plumb, the rollers bind and the door drags or jams. Left alone, a misaligned track bends the rollers and wears the panels. We straighten or replace damaged sections, square the track back to the frame, and roll the door through its full travel to confirm it runs free. Realignment typically lands in the $120 – $240 range depending on how many sections are affected.
Roller Replacement
Rollers are small parts with a big effect: worn steel or nylon rollers get flat spots, and that’s the grinding and rattling you hear every time the door moves. Bad rollers also wear the tracks and panels faster than they should. We swap all the rollers as a set, since they wear at the same rate, and check travel and balance afterward. The typical estimated cost is $110 – $220.
Sensor Calibration
The safety sensors near the floor stop the door from closing on a child, pet or car, and when they’re misaligned or dirty the door reverses or refuses to close at all. It’s one of the most common reasons a door “won’t work” in Richmond. We clean, align and test the sensors, check the wiring back to the opener, and confirm the reversal works under real conditions before we call it done. Sensor work is usually part of a routine visit and costs less than the larger repairs on this list.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on LiftMaster and Chamberlain openers regularly, and that pays off in diagnosis. Both brands share a lot of logic-board and safety-reverse behavior, so when a door opens fine one morning and won’t close the next, the fault is often in the sensor circuit or the opener’s travel limits rather than the door itself. We know where those parts wear out, which saves you the cost of swapping components on a hunch. We also service Genie and Craftsman openers, including older models that other crews won’t touch because the replacement parts take hunting down.
On the door side, we’re factory-familiar with Clopay, Amarr, Wayne Dalton and Raynor. That matters when a panel needs replacing and the profile or color has to match what’s already on the house, and it matters when a Wayne Dalton torsion setup or a Raynor commercial-grade door needs adjustment rather than a rebuild. Whether you have a Chamberlain opener under a Clopay door or a Craftsman opener under a Wayne Dalton door, or any other combination, we can help. Our technicians have up to 13 years of experience across these brands, so the first visit is usually the only visit.
Signs You Need Garage Door Repair Right Now
- A loud bang from the garage followed by a door that won’t lift. That’s almost always a snapped spring. The door may look fine, but the opener is now trying to lift the full weight, and continuing to run it will burn out the motor or snap a cable. Stop using it and call us.
- The door reverses or won’t close all the way. Misaligned or dirty safety sensors cause this more often than any other fault. It’s usually a quick fix, but until it’s done the house isn’t secured and the car stays outside.
- Grinding, squealing or rattling as the door moves. Worn rollers, dry hinges or a track that’s been knocked out of line produce these noises. Small sounds turn into bent panels and worn tracks if they’re ignored, and the repair gets bigger.
- The door hangs crooked or one side lags. An uneven door means a cable, spring or track problem, and the opener is fighting the imbalance every time it moves. Have it looked at before the opener fails too.
- The door is dented, cracked or missing a panel. Impact damage breaks the weather seal and can jam the door in the track. A replacement panel is a modest repair now; a bent track, broken spring and damaged opener add up fast.
Our Garage Door Repair Process – Step by Step
- 1
We take your call and get the details. The brand of your door and opener, what the door is doing, and whether the car is trapped all help us bring the right parts. We answer 24/7 and dispatch fast from 7am to 7pm Sunday through Friday, so a call outside those hours is booked into the next opening.
- 2
We diagnose before we quote. A technician tests the door by hand, checks spring tension, cable condition, track plumb, roller wear and opener travel limits, and confirms the safety reverse is working. On LiftMaster and Chamberlain systems we also read the opener’s diagnostic codes, which narrows the fault fast instead of swapping parts.
- 3
We give you a written price before any work starts. The estimate lists the parts and labor for the repair as diagnosed, and we explain what needs doing now versus what can wait. You approve the quote, and only then do we start. The written estimate sets the final price.
- 4
We complete the repair and test the whole system. Springs get balanced, cables get tensioned, tracks get squared, and the door runs through its full cycle several times. We check the safety reverse and photo-eye sensors in front of you so you can see the door behave correctly.
- 5
We walk you through what we found and how to keep it running. If there’s a part that’s wearing, you’ll hear about it as a heads-up, not a sales pitch. If the door needs a bigger job later, you’ll know what to watch for.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Richmond?
Garage door repair in Richmond typically runs $150 – $600, depending on what failed. Here’s how the common jobs break down: spring repair is usually $180 – $340 for a single spring, and a matched pair is replaced together at about twice that; cable repair runs $130 – $250; opener repair $120 – $320; panel replacement $250 – $500; track realignment $120 – $240; and roller replacement $110 – $220. If you need a whole new door, installation runs $700 – $2200.
What moves the price within a range: door weight and size, whether the door is a single or double, how many parts failed together (a snapped spring often takes a cable with it), the brand and whether the panel profile is still available, and whether the track needs straightening or replacing. Age matters too, since older doors sometimes need parts that take more work to source. To avoid overpaying, get the diagnosis explained and the quote in writing before work starts, and ask whether a part is being replaced because it failed or because it’s close to failing. A free estimate includes the on-site diagnosis, a written itemized price, and the technician’s recommendation on what’s urgent. Prices are typical estimates; the written estimate sets the final price.
Garage Door Repair Near Richmond – Our Service Area
We cover Richmond and the surrounding neighborhoods and towns, including Manchester, Bon Air, Montrose, Lakeside, East Highland Park, Dumbarton, Bensley, Meadowbrook, Chamberlayne, Rockwood and Tuckahoe. Distance and traffic affect when a technician arrives, but most calls inside the metro are reached the same day. If you’re in Manchester or Bon Air, our garage door repair and garage door repair pages cover those areas in more detail. Call (855) 774-2730 and we’ll tell you the earliest opening.
Serving Richmond, VA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Richmond
Garage door repair is fixing the parts of your door system that have failed or worn out, including springs, cables, panels, tracks, rollers, sensors and openers. It’s different from installation, which means a new door, and different from a general handyman visit, which often means the wrong parts and a repeat problem. We diagnose the actual fault first, then repair only what needs it.
Most repairs take one to three hours on site. Roller replacement, sensor calibration and track realignment are usually on the shorter end; spring and cable replacement take longer because the door has to be balanced and tested afterward. Panel replacement depends on whether we have the panel in hand or need to order it. We’ll give you a time estimate when we quote the job.
Typical estimated repair costs in Richmond run from $150 to $600, with spring repair at $180 – $340 for a single spring, cable repair at $130 – $250, opener repair at $120 – $320, panel replacement at $250 – $500, track realignment at $120 – $240 and roller replacement at $110 – $220. The written estimate sets the final price, and the price is quoted and agreed before any work starts. Call (855) 774-2730 for an exact quote; estimates are free.
Yes. We service LiftMaster and Chamberlain openers, Craftsman and Genie openers, and Clopay, Amarr, Wayne Dalton and Raynor doors. Being familiar with these brands means we know where each one wears out, so we diagnose the fault instead of replacing parts until the problem goes away. If your brand isn’t on that list, call us anyway and we’ll tell you whether we can help.
Same-day service is often available in Richmond, especially for a door that won’t close or a car trapped inside. We answer 24/7 and dispatch fast from 7am to 7pm Sunday through Friday; a call outside those hours is booked into the next opening. Call (855) 774-2730 and we’ll tell you the soonest we can get to you. If you’re dealing with a door that won’t move at all, our emergency garage door page explains what to do while you wait.
Workmanship on our repairs is backed, and manufacturer warranties apply to the parts we install according to each brand’s terms. We’ll tell you at the quote stage what’s covered and for how long, so there’s no ambiguity later. Keep your written estimate and receipt; that’s what a warranty claim is based on.
Clear the floor area under and around the door, and move anything leaning against the tracks or stored along the walls. If the car is inside, leave it there if the door is stuck open, but don’t try to force the door by hand. Tell us the door and opener brand when you call if you know it; if not, a photo of the opener and the door helps us arrive prepared.
Schedule Your Garage Door Repair in Richmond Today
A door that’s stuck, crooked or noisy won’t fix itself, and the longer it runs in that condition the more parts it takes with it. Call (855) 774-2730 for a free estimate. We answer 24/7, dispatch fast from 7am to 7pm Sunday through Friday, and give you a written price before any work starts. One call covers springs, cables, panels, tracks, rollers, sensors and openers. Learn more about Garage Door Repair Richmond Pros and what we do.
Written by the team at Garage Door Repair Richmond Pros.